A-LINE ACOUSTICS ELIJAH SYSTEM

A-LINE ACOUSTICS ELIJAH SYSTEM, photo 1 of 10
Tap to inspect finish
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 2 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 3 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 4 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 5 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 6 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 7 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 8 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 9 of 10
Tap to zoom
A-LINE ACOUSTICS ELIJAH SYSTEM, photo 10 of 10
Tap to zoom
1 / 10

A-LINE ACOUSTICS

ELIJAH SYSTEM

$6,595
Condition
Good
Type
Active
Finish
Black

Ships to you

Posted with tracking, and shipping is included — the price you see is the price you pay. This one takes up to seven days to go out, and you'll get the tracking the moment it does.

Description

A-LINE ACOUSTICS ELIJAH SYSTEM Powered Small Venue Portable Line Source Array System Great System for a church, corporate events, acoustic acts, or small bands. Can be used as (2) separate systems, with each system consisting of: (1) ELI1503 on top of a LS118A powered sub and (1) ELI1503 on top of a LS118X Unpowered Sub. Or it can be used as (1) large stereo system, with each side consisting of: (1) LS118A Powered Sub with a LS118X Unpowered Sub, and (2) ELI1503 Tops on top of one of the Subs. This system was used for Demo’s a few times, but was mainly just used in church settings. List Price for the whole system was $13,759.00 System Includes: (4) ELI1503’s Line Source Speaker, (15) x 3” Neodymium Speakers Proprietary 3” Neodymium Full Range Speakers loaded into a sealed cabinet for fast midrange transient and maximum power handling. – 8 Ohms - Black Made in the USA with Baltic Birch Plywood (2) LS118A Powered (1) x 18” Subwoofer Using Bang & Olufsen ICEpower technology with Onboard DSP. (2) x 1000 Watts at 4 Ohms (2) LS118X Unpowered (1) x 18” Subwoofer (4) 19” Poles System has deep pole sockets and these are used to stack (1) ELI1503 on top of another ELI1503. (4) 32” Poles These are used to set the ELI1503’s on top of the LS118’s. If the system is used as: (2) separate systems you use all (4) poles. If you stack (1) ELI1503 on top of another ELI1503, you just use (2) poles. (2) 15’ Powercon to Edison cables These cables power the amplifiers in the (2) LS118A subs. With 4-conductor speakon cable, the amplifier will power (1) additional LS118X Unpowered Subwoofer, and (1) TO (2) ELI1503 Tops. (2) 3’ 12 Gauge Speakon to Speakon 4 Conductor Jumper Cables Used to Jumper a LS118A Powered Sub and a LS118X Unpowered Sub. (4) 5’ 12 Gauge Speakon to Speakon 4 Conductor Jumper Cables Used to Jumper a ELI1503 to a LS118A Powered Sub and also to jumper (2) ELI1503’s together. (2) 25’ 12 Gauge Speakon to Speakon 4 Conductor Jumper Cables When used as (2) separate systems this connects a LS118A Powered Sub and a LS118X Unpowered Sub. System is in good working condition. One amplifier has some of the lettered stenciling coming off. (See photos). This system was made by A-Line Acoustics which was located in Corry, PA. After we purchased this system, A-Line Acoustics was bought by Mitek which owns AtlasIED, and they now sell similar systems under that brand.

Condition notes

Good

Specifications

year
2012

Seller

SPKRS

Westlake Village, CA

5.00

SPKRS holds your payment until you confirm you have the item.